Detalles esenciales
Cantidad (piezas):1
MOQ:1
Envío:空运, 陆运, 海运
número de especificación:NovaDryer-FS10
Introducción del producto
-75°C 10Kg Small Scale Pharmaceutical Industry Freeze Dryer / Lyophilizer NovaDryer-FS10
Main Features:
PLC +PC control system with WIFI remote control
Water cooling system
316L stainless steel chamber and trays
SUS304 stainless steel chamber housing
Hydraulic top press device for shelf cleaning and vial rubber stopper sealing
Tilt angle at the bottom meeting CIP and SIP(Sterilization-in-Place) draining requests
Shelves filled with silicon oil with satisfactory temperature uniformity with difference <1℃
Side leakage of vacuum is tested with helium mass spectrometer to ensure high vacuum
Optional:
CIP(Clean-In-Place)
SIP(Sterilization-in-Place)
H2O2 sterilization port
Specifications
Cold trap maximum icing capacity Vial load capacity | 20kg Ø16mm vial: 4,400 PCS/Ø22mm vial: 2,300 PCS |
| Lowest temperature | ≦-75℃ |
| Condenser cooling rate(From +20°C to -40°C) | ≦30minutes |
| Laminated temperature range | -55~+80℃ |
| Laminate cooling rate(From +20°C to -40°C) | ≦ 60 minutes (empty) |
| Laminated heating rate(From -40°C to +20°C) | ≦ 60 minutes (empty) |
| Pumping rate(From atmospheric pressure to 10pa) | ≦ 30 minutes |
| Freeze-dried box ultimate vacuum | ≦1pa |
| Operation interface | Manual + automatic |
| Interface operation | One-button operation |
| Suggested liquid loading | Max. 10Kg |
| Exterior | SUS304 |
| Chamber: | |
| Interior Material | AISI316L |
| Shelf Material | AISI316L |
| Shelf Qty. | 4 +1 (radiation panel) |
| Shelf size(WxDxT,mm) | 450x600x20 |
| Shelf space(mm) | 100 |
| Shelf lowest temperature | -55℃ |
| Tray Material | AISI316L |
| Standard Tray Size(WxDxT,mm) | 300x450x20 |
| Tray Qty | 8PCS |
| Temperature uniformity | ±1℃ |
| Freeze dry door(Interior) | AISI316L |
| Surface roughness | Ra≦ 0.4μm |
| Shelf flatness | ≦ 0.5mm/㎡ |
| Door lock | Manual lock |
| Cold trap: | |
| Material | AISI316L |
| Coil form | Rectangular |
| Cold trap minimum temperature | -75℃ |
| Defrosting method | Hot water defrosting |
| Door lock | Manual |
| Heating system: | |
| Heat transfer oil | Dow Corning 5cs Low Viscosity Silicone Oil |
| Electric heating | 3kw |
| Heating rate | 1℃/min |
| Vacuum system: | |
| Vacuum pump | Oil vacuum pump |
| Vacuum pump head valve | SIEGV High Vacuum Stop Valve |
| Vacuum pump speed | 40m³/hr |
| Vacuum pump power | 1.5KW |
| Vacuum pump interface | KF40 |
| Connecting pipe | KF40 vacuum stainless steel bellows |
| CIP/de icing system: | |
| Water circulation pump | 0.81kW |
| Sprayer | Ball |
| Nozzle | Wide angle type |
| Cooling System: | |
| Refrigeration method | Two-stage compressor |
| Refrigerant | R507 |
| cooling method | Air-cooling |
| compressor | Bitzer S4N-8.2Y |
| Electronic control system: | |
| PLC | Omron |
| Touch screen | IPC |
| Tele-monitor software system | Netscada |
| Control System | TF-5000 |
| Size and weight: | |
| Structure | Vacuum pump external or internal |
| Dimensions(LxWxH,mm) | 3200x1250x2550 |
| Weight (approx.) | 950Kg |
| Power supply: | |
| Voltage | 380V/50Hz,3 Phase |
| Power consumption | 15kW (Actual power consumption<6kW) |
| Cooling water | 8m3/hr (1.5≤P≤2bar, T≤25°C) |
| Water for injection for chamber cleaning | 80L/min (P≥5bar, T=80°C) |
| Compressed air for pneumatic valves | 40L/min (6≤P≤8bar) |
